Sorry. The NS outputs 5V and is only compatible with 5V USB devices. As Laptops and Netbooks need much higher voltage, you cannot use the NS to recharge.

Yes the NS can be used overseas with no issue. You can charge the NS from any USB port (PC, Laptop) or from any power outlet, provided the correct wall charger is used.

Yes, the NS will charge from any high-current USB port – which are available on most computers. Lower current available ports on some computers, as well as USB ports on keyboards and hubs, may not effectively charge the NS.

The NS contains outstanding Li-Ion-cells, considered the best one of the world. Nevertheless – after 500 Full cycles, (not just 500 charges to another device) the NS will loose its full power.

Yes, the NS is actually compatible with the latest Apple devices like iPhone 6, 6 Plus, iPad Air 2, as well as the prior iterations and iPod Touch devices, excludes certain classic models.

The NS will charge your Apple device by using the original,
white Apple cable that came with the Apple devices.

Yes you can – but we do not recommend it because the battery will drain very quickly.

Yes , this works perfectly.

The NS is compatible with most 5V or USB chargeable smart phones, tablets and portable devices (GPS, portable cameras, etc).

You can double confirm your device compatibility by having a look at the AC wall charger for your phone or tablet. On it there should be a sticker with an output rating. If it has a 5V Output then your device is compatible with the NS.

Do I need to press any button to start charging my phone? Yes, you have to press the button continuously for about 3 seconds to start charging your mobile device.

Yes. The NS has a special function called “small stand-by current”. Unless you do not turn off the NS by pushing the On/Off button for 3 seconds, it continues to provide energy on a very small level.

The NS turns off in two ways:
1. Push the On/Off button for three seconds
2. Unplug the Y-cable from the output jack. After that, the NS automatically turns off after 10 seconds.

Yes. Just push the On/Off button once. The LEDs will turn on and indicate the level of charge left. To turn off LEDs, simply push the On/Off button again.

Sorry. The NS does not support daisy-chain or pass-through charging. We have deactivated this function to protect the NS from being damaged. Please charge the NS separately from other devices. Please always charge the NS first, and then start charging your device.

Yes, you can. But we advise you to fully charge your device first before using.

Yes, you can. But we do not recommend it! Batteries begin fading from the day they are manufactured, no matter if you use them or not. So also storage will cause batteries to age. The NS and any other battery has „to work“ to keep well and fit. The battery cells will deteriorate when not charging and discharging. Therefore, we recommend fully discharging and recharging the NS once a month. This will help to keep the NS healthy. Moreover, the NS must be stored in a charged state, ideally 40 – 50 percent. This assures that the battery will not drop below 2.5V per cell with self-discharge.

Simply press the On/Off button of NS for about three seconds to begin charging.

After connecting to a power source, the LED status indicator will start blinking to indicate charging. The lights can be manually turned off through a short press on the On/Off button allowing for a good night’s rest. Please check the charge status before you disconnect to make sure the NS fully charged.

Yes! The NS has a micro USB input port for this very reason. As more and more devices switch to this connector it seemed obvious to use this for the NS. Additionally, the NS comes with a USB cable with an USB-socket. This means you can plug it into any USB mains plug you may have.

When the LED lights are blinking the battery is still charging, when all 5 lights are solid the NS is fully charged. For example: if three LEDs are solid and two blinking, the NS is about 60% charged.

The NS bracket can be easily removed from one bike to another and a replacement mount bracket can be bought in our shop.

The time of recharge depends on the output current of the power source. If you use a 5V/2A USB adapter, e.g. from our shop, notstrom is fully charged in 9 hours.

Yes, but it cannot work with a hub dynamo directly. You have to connect the hub dynamo to a power converter first. It will convert and regulate the power to 5V DC.

Please note that we do not recommend to charge notstrom via a hub dynamo. Dust and dirt may enter into the unit and damage the notstrom.

If it outputs 5V, the NS can also be charged through a solar panel.

Yes, the NS can be exposed to all weather. But make sure that the input and output ports are closed with their protection caps.

The NS must not be protected from rain and stored in dry place.

The NS is designed to remain attached to the bike even in rain.

You are free to decide if you protect the output port with the attached IP rated silicone cap or leave the cable connected to the NS. If you do not want to remove the cable, that‘ s ok. The connectors provide the most reliable sealed connection. Just be sure that the cable plug and jack are properly mated.